Markets
    Semiconductors

    SK Hynix Plans 874.6 Billion Won Trinity Fab to Speed Korean Chip Supplier Approvals

    A shared cleanroom inside the memory maker's first Yongin plant is meant to help Korean equipment and materials firms win production approval faster.

    Share on X LinkedIn WhatsApp
    An SK hynix memory module on display at Computex
    An SK hynix memory module at Computex 2025. Photo: 4300streetcar via Wikimedia Commons, CC BY 4.0

    What to know

    • SK hynix said on Monday that Trinity Fab, an 874.6 billion won (US$654 million) testing site inside its first Yongin plant, will open in May 2027.
    • SK hynix is contributing 443.2 billion won and Korea's central and local governments the remaining 431.3 billion won, according to the Korea Herald and The Next Web.
    • The operator aims to cut the time suppliers need to bring new equipment and materials into mass production by at least 30%.

    SEOUL

    SK hynix is building an 874.6 billion won (US$654 million) testing fab inside its first plant at the Yongin Semiconductor Cluster, a shared cleanroom where smaller Korean equipment and materials makers can prove their products on production-grade lines before the chipmaker buys them. The facility, called Trinity Fab, is due to open in May 2027, the company said in a statement on Monday, according to Bloomberg as published by The Edge Malaysia.

    The project goes at a weak spot behind Korea's memory boom. The country leads the world in DRAM and high-bandwidth memory, yet only about 30% of the materials, parts and equipment its fabs use are sourced at home, according to Lee Ki-jung, who heads the foundation that will run the site, as quoted by the Korea Herald. For investors, the plan matters because it could change how fast local suppliers win orders from SK hynix as the company pours money into new memory capacity.

    Inside SK hynix's Trinity Fab

    The site takes up about 3,300 square meters on a floor of SK hynix's Yongin plant that was still under construction when reporters toured it on Nov. 10, the Korea Herald reported. A wall will separate it from the company's own cleanroom, where memory chips will be made. Equipment is due to arrive next year.

    It will hold roughly 50 tools covering lithography, etching, deposition, cleaning and measurement, so suppliers can run tests on 12-inch wafers in conditions close to commercial production, according to the company statement cited by Bloomberg. The Korea Herald counted 51 machines for testing materials and components, plus 15 rooms where suppliers can install their own equipment. There will be no extreme ultraviolet lithography machines, so products for those steps will still have to be checked on SK hynix's production lines.

    SK hynix is putting in 443.2 billion won in space, staff and other support. Korea's central government is contributing 373.6 billion won and local governments 57.7 billion won, The Next Web reported, citing Reuters. Those public shares add up to the 431.3 billion won the Korea Herald attributed to government funding. A nonprofit foundation will operate the facility to protect participants' intellectual property, and SK hynix described it as the world's first open-access testbed built to check readiness for mass production.

    Fees have not been set. The foundation will have to cover its own costs once government money winds down in 2031, the Korea Herald said. The cleanroom is scheduled to open in May 2027, with regular testing expected to start in the fourth quarter, according to the Korea Herald.

    Why suppliers struggle to get qualified

    Public research labs in Korea often work with 8-inch wafers, while the big memory fabs run 12-inch wafers, so a tool that performs in a lab can behave differently on a factory floor. Lee Jae-ho, vice chairman of Korean equipment maker TES, told reporters during the tour that his company has had to redesign machines after they performed differently at customer plants. Developing equipment and getting it approved for production can take five to six years, and he estimated Trinity Fab could shave about a year off that, according to the Korea Herald.

    Materials face a similar queue. Yu Won-yang, chief executive of specialty-gas maker TEMC, said approval can take six months to two years, partly because chipmakers cannot spare production tools for trials. TEMC and steelmaker POSCO began producing neon from steelmaking byproducts several years ago; after Russia's invasion of Ukraine disrupted supply in 2022, domestic neon covered 40% of SK hynix's needs by October that year and saved the chipmaker 30 billion won, Yu said. The foundation's target is to cut the time suppliers need to bring new technology into commercial production by at least 30%.

    Some measuring instruments alone cost 1 billion to 5 billion won ($748,000 to $3.7 million) each before running costs, the Korea Herald reported, which is the expense the shared site is meant to spread.

    What suppliers get, and what they give up

    Passing a test at Trinity Fab does not guarantee an SK hynix order, and Samsung Electronics and Micron keep their own qualification rules, the Korea Herald noted. SK hynix may also ask suppliers to sell certain jointly developed technologies only to it for a limited period, said procurement strategy chief Lee Hyun-chul, adding that the restrictions are not permanent and vary by project.

    The testbed sits inside a wider supplier package. SK hynix will spend 1.4 trillion won over five years supporting smaller suppliers, The Next Web reported. Both the Korea Herald and The Next Web said the company now covers up to half of suppliers' early research and development costs and compensates them even when a project falls short. The Next Web added that SK hynix launched a 2 trillion won financing program with four banks and the Korea Trade Insurance Corporation in October and is doubling an interest-free payment support fund to 100 billion won.

    The spending follows a record run for the company. SK hynix reported its highest-ever quarterly profit in October, and in August it said it would spend $38 billion to expand domestic production, including a new DRAM plant in Yongin and a NAND fab in Cheongju, according to Bloomberg. The pricing that funds this build-out has started to cool at the margin, with October contract gains narrowing.

    A committee of government, SK hynix and industry representatives will review applications for testing space, the Korea Herald reported. The selection process and the fee schedule are the next details to watch before the cleanroom opens in May 2027.

    Sources

    1. The Korea Herald: Korea makes world-class memory chips. Can SK hynix-backed Trinity Fab help local suppliers catch up? (Nov. 16, 2026)
    2. The Edge Malaysia (Bloomberg): SK Hynix plans chip testing hub to boost smaller Korean players (Nov. 16, 2026)
    3. The Next Web: SK Hynix's $654m Trinity Fab lets small suppliers test on a real line (Nov. 16, 2026)

    Capital Times Staff

    Capital Times newsroom, Hong Kong, Singapore and Jakarta

    Capital Times covers markets, business and economies across Asia.

    newsroom@capitaltimes.asia

    Our standards: Capital Times reports under the principles set out in our Editorial Standards and Ethics Policy. Spotted an error? Report it to our editors.

    Markets Data

    Hong Kong ClosedShanghai ClosedTokyo ClosedSeoul ClosedSingapore ClosedJakarta ClosedSydney ClosedMumbai Closed